Neumannberlin TLM 67 User Manual download pdf (Page 147)

147

Adapter Cables

Adapter Cable AC 29

Y-cable with XLR 5 F connector and two

unbalanced 6.3 mm mono jacks, with

blocking condensers. It is used to con-

nect the XLR 5 output of the MTX 191

(MTX 191 A see AC 27) matrix amplifier

and KU 100 microphone to units with

6.3 mm monojack inputs.

AC 29 (0.3 m) ..................... Cat. No. 006604

Other cable lengths are available upon request!

Adapter Cable AC 30

Y-cable, 5 m long, to connect two active

capsules, e.g. AK 20 and AK 40 as MS

stereo couple directly to the MTX 191(A)

matrix amplifier. XY or MS signals are

then available at the XLR 5 output con-

nector of the MTX 191 (A). The recording

angle is electrically remote controlled.

KM 100 output stages are not required.

Markings: yellow for channel 1 (cardio-

id), red for channel 2 (figure-8).

AC 30 (5 m) ........................ Cat. No. 008418

Adapter Cable AC 27

Y-cable with XLR 5 F connector and two

unbalanced 6.3 mm mono jacks. It is

used to connect XLR 5 outputs of the

BS 48 i-2 power supply or the

MTX 191 A matrix amplifier to units with

6.3 mm monojack inputs. Designed for

all microphones, excluding KM 100 Sys-

tem and GFM 132.

AC 27 (0.3 m) ..................... Cat. No. 006602

Adapter Cable AC 28

Y-cable with XLR 5 F connector and two

unbalanced 6.3 mm mono jacks. It is

used to connect the XLR 5 output of the

BS 48 i-2 power supply to units with

6.3 mm monojack inputs. Designed only

for KM 100 System GFM 132.

AC 28 (0.3 m) ..................... Cat. No. 006603

Cable Material for General Use

Conductor resistance ................ < 240 ohm/km

Insulation resistance .............. > 20 Mohm x km

Capacitance core/core ....... 105 nF/km (1kHz)

Test voltage core/core ...........................1.2 kV

Test voltage core/shield ....................... 0.6 kV

Temperature range ................... –20° to +70°C

K 3 x 0,08 ............ blk ........ Cat. No. 062728

Conductor resistance ................. < 96 ohms/km

Insulation resistance ............ > 20 Mohms x km

Capacitance core/core ....... 135 nF/km (1kHz)

Test voltage core/core ...........................1.2 kV

Test voltage core/shield ....................... 0.6 kV

Temperature range ................... –20° to +70°C

K 3 x 0,2 .............. blk ........ Cat. No. 062700

Our cable material has been developed by Neumann and is exclu-

sively produced for Neumann by highly qualified manufacturers. All

microphone cables have a counter wound double helix copper

shielding, assuring a particularly high degree of coverage (95%).

HF rejection is exceptionally good, flexibility of the cable excellent.

All prices on request.

Cable Material K 3 x 0,08

• 3 conductors 0.08 mm² copper wire 41 x 0.05 mm²

• Insulation: special thermoplastic

• Shielding: 2 layers of counter wound bare copper wire

• Jacket: special PVC matte charcoal-gray and round

• Printing “Georg Neumann GmbH Berlin - Made in Germany”

• Overall diameter: 3.4 mm

Cable Material K 3 x 0,2

• 3 conductors 0.2 mm² copper wire 102 x 0.05 mm²

• Insulation: special thermoplastic

• Shielding: 2 layers of counterwound bare copper wire

• Jacket: special pvc matte charcoal-grey and round

• Printing “Georg Neumann GmbH Berlin - Made in Germany”

• Overall diameter: 5.0 mm

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 161 162

Comments to this Manuals

No comments

Neumannberlin TLM 67 User Manual Page 147

Comments to this Manuals

Related products and manuals for Microphones Neumannberlin TLM 67